Login
Versatile application

Foam lance

Hand wash

For cars

For all vehicles

Shine and water runoff in one

Omnia Gloss is designed to break down traffic film while adding shine and smooth water runoff. Used in a bucket, it cleans the surface and leaves a glossy finish that helps reduce water spots.

When used with a foam lance, it also creates rich foam. The result is a clean, glossy surface that stays cleaner for longer and is easier to wash next time.

Problems that Omnia Gloss Fixes

No more Traffic film that dulls the surface
Breaks down buildup without hard scrubbing.

No Water spots after washing
Improved runoff helps water slide off instead of drying in.

A flat finish after a wash
Leaves a clean, glossy look every time.

Why Omnia Gloss stands out

Foam when using a foam lance
Creates rich foam for a controlled and satisfying wash.

Gloss and runoff in one step
Enhances appearance while improving water behavior.

Gentle on paint and protection
Safe on paint, clear coat, and existing wax or sealants.

How to use

Step 1 – Mix
Add 2 capfuls to a bucket with 10 liters of water for handwash.
When using a foam lance (e.g. LS-12), dilute to 2–3 % and apply as foam.

Step 2 – Wash
Apply evenly over the vehicle. Use a microfiber wash pad if available.

Step 3 – Rinse
Rinse thoroughly with water - done.

Swedish-Developed

Developed, tested, and 100% made in Sweden to ensure consistent, high quality — from the first spray to the last drop. The formula is created entirely from the ground up and engineered to deliver reliable performance with every use.

Omnia Gloss - Technical info

Product type: Omnia Gloss Shampoo (high-foaming)
Consistency: Liquid concentrate
Suitable for: Cars, motorcycles, boats, RVs, painted surfaces, coated surfaces
Not suitable for: Matte wraps or sensitive matte finishes (unless tested first)
Formula: Highly lubricated, fast-rinsing, residue-free
Application: Bucket wash or foam lance
Dilution:
Bucket: 2 capfuls per 10L
Foam lance: Mix according to equipment instructions
Dwell time: 1–3 minutes
Finish: Glossy, streak-free, water-repellent surface
Compatibility: Safe for wax, sealant, and ceramic coatings
Fragrance: Fresh, clean scent

Omnia Gloss Ingredients

UFI: 3T40-P0AR-100D-3C6H

WARNING. Causes serious eye damage. Keep the container or label at hand if you need to seek medical attention. Keep out of reach of children. Wear protective gloves/eye protection.

IF IN EYES: Rinse cautiously with water for at least 15 minutes. Remove contact lenses if present and easy to do. Continue rinsing. Immediately contact the POISON CONTROL CENTER or a doctor.

Dispose of contents/container at an approved waste facility in accordance with local/national regulations.

Do not use in spray equipment.

Contains: C9–11 alcohols, ethoxylated

Labeling according to Regulation (EC) No 648/2004:

  • Cationic surfactants <5%
  • Non-ionic surfactants <5%
  • Perfume: Ethyl Methylphenylglycidate

You can read the safety data sheet here: Omnia Gloss Safety Sheet

Omnia Gloss pH-Level

Omnia Gloss pH-Level: 🟩6,5-8,0 (Almost neutral)

pH Scale:
🟥 Acid (0–5)
🟩 Neutral/almost neutral (6–8)
🟦 Alkali (9–11)
🟪 Very alkali (12–14)

FAQs

Can I use Omnia on all types of vehicles?
Yes. It’s suitable for cars, motorcycles, boats, caravans, and more.
Can I use Omnia Gloss Shampoo with a foam lance?
Yes. Omnia Gloss Shampoo is designed for both bucket washing and foam lances. In a foam lance it produces thick, clingy foam with excellent cleaning power.
How much Omnia Gloss should I use?
For bucket wash: Use 2 caps per 10L of water.
For foam lance: Mix according to your lance’s recommended dilution ratio.

Didn’t find your answer?

Don't hestitate to contact us